Standard steel adjustable floor system
WHAT ELSE supplies and installs standard steel adjustable raised floor systems in Latvia – about 50–420 mm height with a services void for dry acoustic build-ups.
Discuss a projectThe workhorse steel build-up
The standard steel system is the core adjustable raised floor package WHAT ELSE supplies and installs in Latvia. Steel supports and girders create a stable plane over concrete or other structural decks, with installed heights typically from about 50 mm to about 420 mm depending on the selected configuration.
This range is wide enough for meaningful services voids – power, data, ventilation branches, and other light MEP – while keeping a dry installation path that fits commercial fit-out programmes. Offices, schools, hotels, and public interiors use it when levels must be true and access under the floor matters later.
Damping elements at support points provide the acoustic break between the walking surface and the structure. When boards, supports, and damping parts are specified as one system, projects can target type-approved acoustic performance instead of hoping a finish layer alone will solve impact sound.
WHAT ELSE holds both supply and install. That means setting-out, height control, edge detailing, and coordination with finishes stay under one site discipline rather than splitting catalogue selection from on-site reality.
Services void and dry installation
The void under the boards is planned, not accidental. Cable trays, flexible ducts, and underfloor heating interfaces are routed so they do not bridge damping elements or force boards out of level. Clearances are checked against the chosen height before boards close the floor.
Dry installation avoids wet screed cure times. On multi-trade commercial floors this often unlocks earlier joinery, partitions, and final finishes. Dust and moisture load on adjacent occupied areas stay lower than with large wet pours.
Uneven slabs are corrected by adjusting supports bay by bay. Older Latvian buildings frequently need this approach: local humps and falls would otherwise demand thick levelling compounds that add weight, water, and programme risk.
Where environmental product data is available for selected boards or damping materials, we can include environmentally declared documentation in the project pack. Specifiers get readable evidence without supplier-brand theatre – only the performance and declaration data the brief requires.
Delivery with WHAT ELSE on site
We survey finished floor targets, door thresholds, lift interfaces, and wet-zone transitions before mobilisation. The steel system is then installed to locked levels, inspected, and handed over ready for the approved finish floor.
Public and commercial clients often need inspection readiness: product data, acoustic references for the chosen build-up, and as-built notes. We align documentation with the same accountable process used on our wider renovation projects.
The 50–420 mm band covers most standard commercial and institutional briefs in Latvia. Extremely low headroom may push toward the low-profile system; extreme acoustic targets or sports loads may need a dedicated high-acoustic or sports configuration instead.
Share drawings, target FFLs, and MEP intent under the floor. WHAT ELSE will confirm the steel configuration, supply the components, and install the system so the void, levels, and acoustic break work as one package.
FAQ
- What height does the standard steel system cover?
- Typically about 50–420 mm installed height, depending on supports, girders, boards, and damping elements.
- Can services run in the void?
- Yes. The void is designed for power, data, and other light MEP when clearances are checked against the selected height and acoustic break.
- Who installs the system in Latvia?
- WHAT ELSE supplies and installs the steel adjustable floor under one team – from setting-out to inspection before finishes.