Timber beam adjustable floor system
WHAT ELSE supplies and installs timber and CLT-compatible adjustable floor systems in Latvia – about 85–480 mm height for dry acoustic build-ups on timber structures.
Discuss a projectFloors matched to timber and CLT structures
Timber and CLT buildings need floor packages that respect how the structure moves, breathes, and carries load. WHAT ELSE supplies and installs timber-beam adjustable floor systems in Latvia for projects where a steel-only package would fight the architectural logic of the frame.
Installed heights typically sit around 85–480 mm depending on beam depth, support layout, boards, and damping elements. That band allows a meaningful void, acoustic isolation, and service routes while staying compatible with mass-timber detailing.
Dry installation keeps water out of timber-sensitive zones during fit-out. On new CLT floors and renovated wooden decks alike, reducing wet trades lowers moisture risk and shortens the wait before finishes can start.
We work as the contractor who both supplies and installs: structural interfaces, acoustic targets, and finish floor levels are coordinated under one accountable path rather than left between a catalogue and a separate fixer.
Acoustic break on timber decks
Damping elements at support points interrupt vibration between the walking surface and the timber or CLT deck below. Specified as a system, the build-up can pursue type-approved acoustic performance suited to apartments, schools, offices, and hospitality over timber structures.
Timber beams and adjustable supports create a controlled void. Services can run where height allows, provided fixings and penetrations do not create rigid bridges that undo the acoustic break. We check these details against drawings before boards close the floor.
Boards are set to a true plane even when the deck has construction tolerances. Adjustment absorbs local deviation without pouring thick wet layers onto timber – a practical advantage on many Latvian mass-timber and wooden-floor projects.
Where selected materials carry environmental declarations, project documentation can include environmentally declared data for boards or damping components. Specifiers get evidence aligned with sustainable timber briefs without OEM model names.
Supply and install for timber projects in Latvia
Typical uses include multi-storey timber housing, CLT office floors, school extensions in wood, and hotel or care buildings where the visible structure is timber but the floor must still meet comfort and acoustic expectations.
Before mobilisation we confirm deck condition, target finished floor level, fire and acoustic package intent, and how edges meet walls, stairs, and wet rooms. Moisture-sensitive junctions get explicit detailing – dry floor systems still need disciplined edges.
On site WHAT ELSE sets out supports and beams, locks heights, installs boards, and inspects before the finish floor. Clients keep one team for the subfloor package inside a wider interior or turnkey brief if required.
Share structural drawings, timber species or CLT notes, and acoustic goals. We will confirm whether the 85–480 mm timber-beam configuration fits and deliver supply plus install in Latvia.
FAQ
- What height range does the timber beam system cover?
- About 85–480 mm installed height, depending on timber beams, supports, boards, and damping elements.
- Is the system suitable for CLT floors?
- Yes. The timber-beam package is intended for timber and CLT structures where dry acoustic build-ups and compatible detailing matter.
- Does WHAT ELSE install on timber projects?
- Yes. We supply the system and install it in Latvia, coordinating levels, the acoustic break, and finish interfaces under one team.